Our Automotive Electronics are
designed to improve your driving experience!
Our new innovative SMART gear display is designed to fit in
a standard 2" (52mm) gauge pod opening, uses a 5x7 led dot
matrix type display available in 2 colors. Custom LED colors
are available by request for a small fee. This display is
designed to be used as a standalone gear display, with
purchase of an interface module, or with the new
Shift Box SMART. The (+) plus Interface Module+
outputs a 0-5V analog voltage for use with ECU's or data
loggers for a simple interface signifying current gear. This
is useful on ECU's like Haltech and AEM Infinity which allow
boost by gear, or different maps by gear. The display MUST
be used with one of our interface modules or compatible
shift boxes. If you don't see your transmission type listed,
be sure to contact us as we can program the interface module
to work with virtually any electronic automatic
transmission. It can even be made to work with manual
transmissions if you have a way to mount position sensors,
or micro switches to detect gear position. Display includes
a 3' or 5' plug in cable and mounting hardware. Some wiring
is necessary to install the interface module or shift box.
The SMART
Display Interface
Module includes the following features:
- Billet machined black
enclosure
- Programmable to many transmission
configurations
- Powered by a powerful high
quality PIC®
Microcontroller
- Wiring harness with plug in
connection
- Limited 1 year warranty
- Retail price ONLY $59.99
The SMART+
Display Interface
Module includes the following features:
- Billet machined black
enclosure
- 0-5VDC Analog voltage output *
- Programmable to many transmission
configurations
- Powered by a powerful high
quality PIC®
Microcontroller
- Wiring harness with plug in
connection
- Limited 1 year warranty
- Retail price ONLY $99.99
* The analog voltage output on the
Interface Module - SMART+ is proportional to the current gear for use
with an ECU or data logger. The module can be used standalone without
the gear display if this is the only feature you are interested in.
Voltage outputs 1.0V for first gear and increments in 0.5V steps for
each gear up to gear 7 at 4.0V. If no gear is determined or there is a
fault the output will be 0.5V.
Please specify in
order comments: Year, Make, Model, Transmission model
Known compatible
transmissions:
(More to be added soon, contact us)
- Mitsubishi W4A32, W4A33, F4A32,
F4A33
- Mitsubishi
F4A41, F4A42, F4A51
- GM 4L60E, 4L80E
- Subaru 4EAT
- Chrysler 41TE, 40TE, 41AE,
Ultradrive variants
|
Gear Display -
Interface Module - SMART
ONLY $39.99 |
|
OUT OF STOCK |
|
Gear Display -
Interface Module - SMART+
ONLY $59.99 |
|
OUT OF STOCK |
|
Disclaimer: Forced Four, and
the employees of Forced Four are not responsible for any
damage or personal injury caused by the misuse, improper
installation, product glitches, or product failures.
By installing this product and using this product, you are
agreeing to this disclaimer. Forced Four will stand behind
the quality of our products, and will try to correct any
issues you may have while using this product, but are in no
way liable for what this product may do.
Added to catalog on
9/21/15
|