SMART PRND
Module V3 -
Product Support Page
Last updated
10/10/2024
SMART+ PRND2L Module
Version 3.0
Wiring
instructions:
(See
Function Table)
-
Red
wire connect to ignition switched 12V
-
Black
wire connect to sensor ground, or chassis ground at TCM
-
Orange
wire outputs 0-5V analog voltage for interface to SMART
TCM, ECU, or data logger
·
W/Black
wire connect to PARK
-
W/Grey
wire connect to the REVERSE
-
W/Yellow
wire connect to NEUTRAL
-
W/Brown
wire connect to DRIVE
-
W/Green
wire connect to 2nd
-
W/Blue
wire connect to LOW
Usage:
·
Wire as instructed, insulate any unused wires
·
Mount in a suitable location under the vehicle dash
·
Orange wire outputs:
|
Function Table |
|
Pin
Active to 12VDC |
Shift Selector Position |
Output VDC |
|
W/Black |
Park |
0.50
VDC |
|
W/Grey |
Reverse |
1.30
VDC |
|
W/Yellow |
Neutral |
2.10
VDC |
|
W/Brown |
Drive |
2.90
VDC |
|
W/Green |
2nd |
3.70
VDC |
|
W/Blue |
Low |
4.50
VDC |
Confused? Contact us at
sales@forcedfour.com
|
