SMART PRND &
Gear+
Module V4 -
Product Support Page
Last updated
10/24/2024
SMART+ PRND2L / Gear Module
Version 4.0
·
This module combines the PRND2L module and the SMART+ Gear
module
Wiring instructions:
-
Red
wire connect to ignition switched 12V
-
Black
wire connect to sensor ground, or chassis ground at TCM
-
Orange
wire outputs 0-5V analog voltage for interface to SMART
TCM, ECU, or data logger
·
W/Black
wire connect to PARK
-
W/Grey
wire connect to the REVERSE
-
W/Yellow
wire connect to NEUTRAL
-
W/Brown
wire connect to DRIVE
-
W/Green
wire connect to 2nd
-
W/Blue
wire connect to LOW
-
Yellow
wire connect to Shift Solenoid A
-
Brown
wire connect to Shift Solenoid B
|
Function Input vs Output Table W4A33
|
|
Inputs Active to 12VDC |
Shift Selector Position |
Transmission Gear |
Analog Output |
|
W/Black |
Park |
N/A |
0.50
VDC |
|
W/Grey |
Reverse |
N/A |
0.90
VDC |
|
W/Yellow |
Neutral |
N/A |
1.30
VDC |
|
W/Green & Yellow & Brown |
2nd |
1st |
1.70
VDC |
|
W/Green & Brown |
2nd |
2nd |
2.10
VDC |
|
W/Blue & Yellow & Brown |
Low |
1st |
2.50
VDC |
|
W/Brown & Yellow & Brown |
Drive |
1st |
2.90
VDC |
|
W/Brown & Brown |
Drive |
2nd |
3.30
VDC |
|
W/Brown |
Drive |
3rd |
3.70
VDC |
|
W/Brown & Yellow |
Drive |
4th |
4.10
VDC |
|
Function Input vs Output Table A340E
|
|
Inputs Active to 12VDC |
Shift Selector Position |
Transmission Gear |
Analog Output |
|
W/Black |
Park |
N/A |
0.50
VDC |
|
W/Grey |
Reverse |
N/A |
0.90
VDC |
|
W/Yellow |
Neutral |
N/A |
1.30
VDC |
|
W/Green & Yellow |
2nd |
1st |
1.70
VDC |
|
W/Green & Yellow & Brown |
2nd |
2nd |
2.10
VDC |
|
W/Blue & Yellow |
Low |
1st |
2.50
VDC |
|
W/Brown & Yellow |
Drive |
1st |
2.90
VDC |
|
W/Brown & Yellow & Brown |
Drive |
2nd |
3.30
VDC |
|
W/Brown & Brown |
Drive |
3rd |
3.70
VDC |
|
W/Brown |
Drive |
4th |
4.10
VDC |
Confused? Contact us at
sales@forcedfour.com
Visit
www.ForcedFour.com/support.htm for more
installation information and setup help.
Confused? Contact us at
sales@forcedfour.com
|
